Get a true zero
- Mount and level the scope correctly, and torque the rings and base to spec.
- Zero at 100 yards from a solid, prone position, the same way you'll shoot in the field.
- Fire groups, not single shots, and adjust to the center of the group.
- Set the zero stop so the turret returns to zero by feel.
- Confirm zero every season, after travel and after any knock to the scope.
Measure your real velocity
The velocity on the ammo box was measured from a different rifle. Your rifle's real muzzle velocity is the single most important input to your ballistic solution.
- Use a chronograph to measure at least 10 shots and use the average.
- Record the temperature. Velocity can change with temperature, so re-check in cold weather.
- Use the same lot of ammunition you'll hunt with when you can.
Confirm your drops at distance
Ballistic apps are a prediction. Shoot at distance to confirm, often called "truing" your data, before you trust it on an animal.
- Enter your rifle, bullet, measured velocity and zero into your ballistic app.
- Shoot at 300, 500 and the farthest distance you plan to hunt, in calm conditions.
- If impacts are consistently high or low at long range, adjust velocity (or the app's truing tool) until the prediction matches.
- Make a dope card: your dial or hold at each distance for your typical hunting conditions.
Write your card in MOA to match your turret. Example for a typical 6.5 Creedmoor hunting load: 300 yds 3.0, 400 yds 6.25, 500 yds 9.75 (yours will differ).
Write your card in mils to match your turret. Example for a typical 6.5 Creedmoor hunting load: 300 yds 0.9, 400 yds 1.8, 500 yds 2.8 (yours will differ).
Elevation and temperature change your drops. If you practice at 4,000 feet and hunt at 9,000, your app (with the right inputs) handles the difference.
Practice safely at a proper range. Know and follow your state's hunting laws, including rules on electronic optics and shooting from roads or vehicles.